Development recommendations and rolling modes enhancing the effectiveness of automatic control of the
mill 2030
Period: 2000-2001
Customer:
OJSC "NLMK"
Development of optimal thermal working conditions of the mill 2030 to ensure effective flatness
control of cold rolled
strips under changing speed, strength and deformation parameters
Period: 2000-2001
Customer:
OJSC "NLMK"
Development and implementation methods of work rolls thermal profiling of stands 1-4 of mill 2030,
the justification
and optimization of machined profile and modes of rolls operation
Period: 2001-2002
Customer:
OJSC "NLMK"
Creation of effective methods providing optimal stress state of coils during rolling and strips
winding in the mill 2030
Period: 2001-2002
Customer:
OJSC "NLMK"
Development and implementation of new elements of technology of cold rolling of strips with thickness
of 0.5-0.6 mm
at the mill 2030 with in order to improve the quality and hourly productivity
Period: 2002-2003
Customer:
OJSC "NLMK"
Development of technology for rolling and tempering, algorithm of technological process
control
Period: 2002-2003
Customer:
PJSC "NKMZ"
Development of new efficient technology of the optimal bulk stress state forming of coils during
rolling, strips winding
on mill 2030 and during the bell annealing, taking into account data on the temperature and flatness
distribution
by the strip length and width
Period: 2003-2004
Customer:
OJSC "NLMK"
Improving the technology of cold rolling of electrical steel, providing greater stability of the
process
Period: 2003-2004
Customer:
OJSC "NLMK"
Providing scientific and technical consulting services in the hot and cold rolling
Period: 2003
Customer: "Data Center" (Russia)
Improving technology and increasing the speed of a continuous cold rolling mill 2030 of the strips
with the use of vibration monitoring system
Period: 2004-2005
Customer:
OJSC "NLMK"
Scientific and technical audit of the existing rolls cooling system of the finishing stands
of hot strip rolling mill 2000 of the Magnitogorsk Iron and Steel Works and study of system
performance improvement opportunities
Period: 2004-2005
Customer:
Lechler Gmbh
The
main Customer: OJSC"MMK"
Integrated scientific and technical consulting services in calculating the parameters
of the rolling processes and plate rolling technology, including an analysis of rolls cooling
of rolling mills and study the rolls temperature modes
Period: 2005
Customer:
Lechler Gmbh
Development of efficient low-cost solutions to improve the work rolls cooling system of finishing
stands of WS HSM 2000
Period: 2004-2005
Customer:
OJSC "NLMK"
Survey of the coolant supply system on the mill rolls of 4-stands 1400 SRS-5 and development
of recommendations for improving its effectiveness
Period: 2005
Customer:
OJSC "NLMK"
Research and development of new technical solutions to reduce resonant vibrations in the mill 2030
and improve the quality
of the strips surface with the use of vibration monitoring system and equipment diagnostics of rolls
stacks
and the drive lines of stands
Period: 2005-2006
Customer:
OJSC "NLMK"
Scientific and technical consulting services in considering options for modernization and development
of NLMK in the area of technology of hot rolling, pickling, cold rolling,
heat treatment and tempering of thin rolled products
Period: 2006
Customer:
OJSC "NLMK"
Development and implementation of new technology and rolling speed modes, methods of resonant
vibrations and
periodic strip defects control in order to improve the performance of continuous rolling mill
2030
Period: 2006-2007
Customer:
OJSC "NLMK"
Development and implementation at the 5-stands mill 2030 the modes of strips cold rolling with a
given rational
distribution of elongations over the width of strips providing enhanced their flatness and surface
quality
after technological processing units of PCRSC
Period: 2006-2007
Customer:
OJSC "NLMK"
Scientific and technical support of technical and commercial bids preparing for rolls cooling
systems of hot rolling mills 1700 Severstal Ispat-Karmet, Kremnikovtsy, 3000 heavy plate mill of
Alchevsk Metallurgical Works
Period: 2006-2007
Customer:
PJSC"NKMZ"
The project of the automatic flatness control system of
strips using
non-contact measuring principle (on the temper mill No 1)
Period: 2007
Collaborators:
CJSC"Inkomet";
OJSC"Chermetavtomatika"
Customer:
OJSC "NLMK"
Scientific and technical audit of flat products technology in the shop number 3 of AZOCM,
scientific and technical expertise of cold rolling mills, "Kvarto-400/1000h1200 SCODA»,
«Kvarto-250/750h900 (№ 11)",
"Kvarto-150/500h450" and "Kvarto-375/1000h1000 (Tandem 1000)" AZOCM, the
definition of rational
directions of modernization of the above mills of AZOCM
Period: 2007
Customer: PJSC "AZOCM" (Ukraine)
Study of the quality of hot-rolled product produced from the original iron by plasma melting
method
Period: 2007
Customer: CJSC"Plazmateks" (Ukraine)
Scientific and technical consulting services - contracts maintenance for reversing mills supply
for cold rolling of strips of electrical steel
Period: 2007
Customer:
Sundwig Gmbh
Improving computer systems
WinColdRolling,
CoilTemper3D,
TRollAB
and training to work with computer systems
Period: 2008
Customer:
Sundwig Gmbh
Off-load, under-load tuning and commissioning for permanent
commercial operation of the automatic strip flatness control system using non-contact measuring
principle
Period: 2008-2009
Customer:
OJSC "NLMK"
Development of a software complex for rolls cooling system
in finishing stands of WS HRM 2000 of OJSC "MMK"
Period: 2009-2010
Subcontractor:
CJSC"ASC"
Customer:
PJSC"NKMZ"
The
main Customer: OJSC"MMK"
Development of technology for the production of hot rolled and cold rolled strips in coils,
integrated technological specification and initial data for design proposals for the construction of
the sheet rolling complex
in Russia
Period: 2011
Customer:
UkrSSEC "Energostal"